主要学术成果（论文、专利、专著、译著等） |
◆ Xiaopeng Cheng, Yonghe Li, Tianci Cao, Rui Wu, Mingming Wang, Huan Liu, Xianqiang Liu, Junxia Lu* and Yuefei Zhang*, Real-time observation of chemomechanical breakdown in a layered Nickel-rich oxide cathode realized by in situ scanning electron microscopy, ACS Energy Lett. 6(2021)1703-1710. ◆ Junxia Lu*, Qi Zhu*, Jin Wang, Hua Wei, et al., Diffusive crack-grain interplay in freestanding nanocrystalline silver thin film, Materialia, 17(2021) 101116. ◆ Jinyao Ma, Junxia Lu, Liang Tang, Jin Wang, et al., A novel instrument for investigating the dynamic microstructure evolution of high temperature service materials up to 1150℃ in scanning electron microscope, Review of Scientific Instruments, 91 (2020) 043704. ◆ Rafi Ullah, Junxia Lu*, Lijun Sang, You Xiaoxiao, et al.. In-situ tensile deformation behavior of as-built laser direct metal deposited Ti–6Al–4V alloy at 200 ℃, Journal of Alloys and Compounds 817 (2020) 152781. ◆ Wenjing Zhang, Junxia Lu*, Jin Wang, Lijun Sang, et al.. In-situ EBSD study of deformation behavior of Inconel 740H alloy at high-temperature tensile loading, Journal of Alloys and Compounds 820 (2020) 153424. ◆ Jin Wang, Junxia Lu*, Xiaoxiao You, et al., In-situ comparison of deformation behavior at 23℃ and 650℃ of laser direct melting deposited Ti-6Al-4V alloy, Materials Science & Engineering A, 749 (2019) 48-55. ◆ Junxia Lu*, Ling Chang, Jin Wang, Lijun Sang, et al., In-situ investigation of the anisotropic mechanical properties of laser direct metal deposition Ti6Al4V alloy, Materials Science & Engineering A, 712 (2018) 199-205. ◆ X.P. Cheng, Y.H. Li, H.F. Shi, J.X. Lu*, Y.F. Zhang, Rate-dependent electrochemical reaction mechanism of spinel metal oxide anode studied by in situ TEM, Journal of Alloys and Compounds, 763 (2018) 349-354. ◆ D.S. Sun, Y.H. Li, X.P. Cheng, H.F. Shi, S. Jaffer, K. Wang, X.Q. Liu, J.X. Lu*, Y.F. Zhang*, Efficient utilization of oxygen-vacancies-enabled NiCo2O4 electrode for high-performance asymmetric supercapacitor, Electrochimica Acta, 279 (2018) 269-278. ◆ Y.H. Li, J.X. Lu*, X.P. Cheng, et al., Interfacial lithiation induced leapfrog phase transformation in carbon coated Se cathode observed by in-situ TEM, Nano energy, 48 (2018) 441-447. ◆ Xiappeng Cheng, Yonghe Li, Lijun Sang, Jinyao Ma, Huifeng Shi, Xianqiang Liu, Junxia Lu*, Yuefei Zhang, Boosting the electrochemical performance of MnO3 anode for long-life lithium ion batteries: Dominated by an ultrathin TiO2 passivation layer, Electrochimica Acta, 269 (2008) 241-249. ◆ Jun-Xia Lu*, Ling Chang, Shi-Kai Wu, Shi-Kun Yin, Dendritic boundary corrosion of AA2198 weld using fiber laser welding with Al-Cu filler wire, Acta Metall. Sin.,, 31 (2018) 735-741. ◆ Shikai Wu, Jianchao Zhang, Jiaoxi Yang, Junxia Lu, et al., Investigation on microstructure and properties of narrow-gap laser welding on reduced activation ferritic/martensitic steel CLF-1 with a thickness of 35 mm, Journal of Nuclear Mateirals, 503 (2018) 66-74. ◆ J.N. Qiao, J.X. Lu, S.K. Wu, Fatigue cracking characteristics of fiber Laser-VPTIG hybrid butt welded 7N01P-T4 aluminum alloy, International Journal of Fatigue, 98 (2017) 32-40. ◆ 由晓晓，常玲，吕俊霞*，原位SEM研究 LDMD Ti-6Al-4V 合金 β 晶界对拉伸断裂行为的影响，表面技术，2019年5月，第48卷第5期 ◆ 16.王灿，吕俊霞，张建超，吴世凯，中国激光,2018，45（03）：0302002。 17. 张建超，吕俊霞，乔俊楠，吴世凯等，应用激光，2017，37（3），355-361。 |
