主要学术成果(论文、专利、专著、译著等) |
专著及论文代表作: 著作及编、译著 [1] 隋允康,宇慧平.响应面方法的改进及其对工程优化的应用[M].科学出版社,2011. [2] 隋允康,宇慧平,杜家政,材料力学——杆系变形的发现[M],机械工业出版社,2014. [3] 刘永东,刘亭立,宇慧平等,教与学的革命——引导的艺术(译)[M],高等教育出版社,2012. [4] 邱棣华,宇慧平,邱爽,材料力学学习与考试指导[M],中国电力出版社,2010.近几年部分期刊论文 [5] 宇慧平,皮本松,陈沛,秦飞. 交联环氧树脂热力学性能的分子模拟. 北京工业大学学报,2019,45(4): 322-329 [6] 元月,宇慧平,秦飞等. 热像仪标定QFN 封装表面发射率及透射率的研究. 激光与红外,2017: 46(9), 0917004(1-5) [7] Huiping Yu, Mingqing Hu, Yuehua Liu. Analysis of the effect of geometrical parameters on fatigue performance of spot-weld joint for ultra-high strength steel. China Welding, 2016,25(4):12-25 [8] 宇慧平,冯峰. 过载拉伸消除奥氏体不锈钢焊接残余应力的数值分析.焊接学报,2016,37(8):119-123 [9] 宇慧平,元月.不同工艺下超高强钢点焊残余应力的试验分析.焊接学报,2016,37(9):35-38. [10] 王晓光,宇慧平.超高强钢点焊结构疲劳试验分析.焊接学报,2016,37(2): 99-102. [11]宇慧平,王伟伟.基于响应面法的超高强钢点焊结构的尺寸优化.焊接学报,2014,35(4):45-48. [12]宇慧平,王伟伟.超高强钢点焊结构拉剪试验及数值仿真.焊接学报, 2013, 34(10):9-12. [13]宇慧平,元月,韩长录.不同工艺下点焊残余应力的数值分析.焊接技术,2016, 45(1):14-18 [14]宇慧平,杨柳,冯峰.过载法消除矩形压力蒸汽灭菌器焊接残余应力的数值分析.压力容器, 2015, 32(6):49-54 [15]宇慧平,韩长录.矩形压力容器焊接残余应力的数值分析.焊接技术, 2014,43(6):7-11 [16]宇慧平,冯峰.奥氏体不锈钢单层焊与多层焊残余应力数值分析.焊接技术, 2014,43(5):19-2 近几年国际会议论文 [17] Bensong Pi, Huiping Yu, Pei Chen, Fei Qin.Thermal conductivity of epoxy resin using molecular dynamics simulation. ICEPT 2018:995-999 [18] Shichao Yuan, Huiping Yu, Ming Xian, Fei Qin. Simulation research on wafer warpage and internal stress in the First Passivation process of eSiFO package. ICEPT 2018:990-994 [19] Yue Yuan, Huiping Yu. QFN cutting temperature measurement basing on the infrared thermal imager. ICEPT 2017: 1073-1077 [20] Huiping Yu, Mingqing Hu. Analysis the interface delamination of Cu and EMC adhesive material in the cutting process of electronic chip based on cohesive zone modeling. ICEPT 2016: 943-946 [21] Huiping Yu, Feng Feng.Numerical Analysis and Parameter Optimization of Thermal Stress Effect for Low-K Layer Flip-Chip with Copper Pillar Bumping. ICEPT 2015 [22] HuiPing Yu, MingQing Hu.The Experimental study of Quenched and Unhardened Boron B1500HS.2014 International Conference on Mechanics and Materials Engineering: 722-726 |